Importance of the biogenic organic matter in photo-formation of dissolved gaseous mercury in a culture of the marine diatom Chaetoceros sp

Laboratory experiments on DGM production under light/dark cycles in a culture of the marine diatom Chaetoceros sp. spiked with 200 ng l(-1) of mercury have been performed. DGM formation has been investigated also in the cell exudates, obtained by filtration of the cell culture. Results show that the cell culture and the filtrate give the same value of DGM production (2.24+/-0.88 pg min(-1) l(-1) and 2.23+/-0.02 pg min(-1) l(-1), respectively) in the light (40 W m(-2)), values much higher than to those obtained in the medium culture alone. A significant DGM production has been measured in dark conditions both in the cell culture (0.48+/-0.11 pg min(-1) l(-1)) and in the filtrate (0.85+/-0.10 pg min(-1) l(-1)). The results highlight that the organic compounds released by the cell in the culture medium play a fundamental role in the DGM photo-formation processes.     

Dynamic modeling of a dual active bridge DC to DC converter with average current control and load‐current feed‐forward

Bidirectional power flow is needed in many power conversion systems like energy storage systems, regeneration systems, power converters for improvement of the power quality and some DC‐DC applications where bidirectional high power conversion and galvanic isolation are required. The dual active bridge (DAB) is an isolated, high voltage ratio DC‐DC converter suitable for high power density and high power applications, being a key interface between renewable energy sources and energy storage devices. This paper is focused on the modeling and control design of a DC‐DC system with battery storage based on a DAB converter with average current mode control of the output current and output voltage control. The dynamic response of the output voltage to load steps is improved by means of an additional load‐current feed‐forward control loop. An analytical study of the load‐current feed‐forward is presented and validated by means of both simulations and experimental results. Copyright © 2014 John Wiley & Sons, Ltd.     

Methylene blue adsorption by chemically activated waste pork bones

Bone is an inorganic template containing organic material inside which can be converted into hydroxyapatite‐rich material by pyrolysis. Nowadays, there is a growing research interest in the use of hydroxyapatite, the chemical formula of which is Ca₁₀(PO₄)₆(OH)₂. In the present work, pork bone, an abundant biomass source and food waste, has been converted into structured porous hydroxyapatite by a three‐step process including precharring under mild conditions, chemical activation, and thermal activation. The investigated activating agents were NaOH, KOH, K₂CO₃, H₂SO₄, and H₃PO₄. A thorough investigation of the influence of different activating protocols on the chemical and textural properties of the produced material was carried out by nitrogen adsorption–desorption at 77 K, potentiometric titrations, Fourier transform infrared, and X‐ray diffraction techniques. Chemical activation with NaOH, K₂CO₃, and H₂SO₄ increased the specific surface area up to 53%. H₃PO₄ reduced both surface area and pore volume, and KOH showed little influence on the pore structure. The produced materials were evaluated by methylene blue adsorption tests and showed significant improvement as a result of chemical activation. As a main effect, acid treatment increased methylene blue adsorption kinetics, probably owing to an increase in micropororosity, whereas alkali activation enhanced the adsorption capacity of the resultant biochar.     

Influence of the gasket materials on the clamping pressure distribution in a PEM water electrolyzer: Bolt torques and operation mode in pre-conditioning

To keep optimally connected, all electrolysis cell elements is one of the most important design criteria. The optimal distribution of the clamping points is crucial to increasing cell performance. In this work, the compression pressure distribution inside of a 25 cm² PEM electrolysis cell was evaluated, using different materials: Teflon®, Viton®, ethylene propylene diene monomer rubber (EPDM), and nitrile rubber. Sealing material evaluation was performed taking as performance indicators: total compressed area (%) and compression pressure, for different torques applied. Pressure distribution was obtained by using pressure-sensitive films, analyzing the distribution of pressure points from three-dimensional plots (3D), and quantifying intensities of the images obtained. Results showed that pressure points distribution depends on the stiffness and thickness of the gasket materials. For a tightening torque of 3.70 N m, a pressure of 2.23 MPa is obtained with 85% of the membrane area compressed using nitrile rubber-EPDM gaskets.     

Analysis of in situ monitored thermal cycling benefits for wireless packaging early reliability evaluation

With the increasing complexity of the power amplifier (PA) module architecture, the probability of a thermally induced stress related failure mechanism increases. To help evaluate the increase in module complexity, a more sophisticated in situ monitored thermal cycle reliability test is available. The module is monitored in real time using a resistance daisy chain methodology designed to provide coverage using resistance feedback throughout the entire hierarchy of the module and carrier board interface. Monitored temperature cycling allows for real time failure feedback and enhanced failure signature information. Further, the testing technique has proven to be a valuable method for capturing the early stages of a module mechanical failure at the temperature extremes. Moreover, statistical evaluation of the failure data (Weibull analysis) is improved and better accuracy of the failures in time (FIT) rate can be determined.     

Transitions in Presence of Short Laser Pulses

Abstract

Accurate numerical calculations are carried out to investigate the validity of the two-state approximation in the case of resonant interactions between electromagnetic radiation and atoms. Short pulses are considered and the presence of the atomic spectrum is modelled by introducing a third, non-resonant, state. We show that the harmonics of the pulse profile may play a significant role in the dynamics of the process and may cause energy non-conserving transitions between the atomic states.     

Google Scholar Metrics evolution: an analysis according to languages

In November 2012 the Google Scholar Metrics (GSM) journal rankings were updated, making it possible to compare bibliometric indicators in the ten languages indexed—and their stability—with the April 2012 version. The h-index and h-5 median of 1,000 journals were analysed, comparing their averages, maximum and minimum values and the correlation coefficient within rankings. The bibliometric figures grew significantly. In just seven and a half months the h-index of the journals increased by 15 % and the median h-index by 17 %. This growth was observed for all the bibliometric indicators analysed and for practically every journal. However, we found significant differences in growth rates depending on the language in which the journal is published. Moreover, the journal rankings seem to be stable between April and November, reinforcing the credibility of the data held by Google Scholar and the reliability of the GSM journal rankings, despite the uncontrolled growth of Google Scholar. Based on the findings of this study we suggest, firstly, that Google should upgrade its rankings at least semi-annually and, secondly, that the results should be displayed in each ranking proportionally to the number of journals indexed by language.